Select Page

Mac has battery connector power-related issues.

 

The reasons for the power-related issues with my Mac could be the following.

The charging system consists of four components:

– The battery stores power (charging) and provides power (discharging).

charger that delivers power to your MacBook and its battery.

charging circuit that converts the charger voltage to tun your Mac and charges the battery.

System Management Controller (SMC) chip controls the behavior of the charging circuit.

 

Steps to follow to determine why your Mac has  power-related issues:

1. Check the charger output voltage to ensure your charger is working properly. Using generic chargers can also be detrimental to your Mac.

2.  Inspect the charging port on your Mac to ensure that it has no dirt or burned marks as it can attract debris due to its strong magnetic attraction.

3.  Ensure that the battery connector that connects the battery to the logic board is working.

4.  Replace a faulty battery if you receive any of the following notifications.

–  Service Battery

–  Replace Soon

–   Replace Now

–   No Battery Available

5.  If your Mac has been exposed to water the SMC cannot talk to the battery indicating that no battery is found.

Finally: 

If you have tried to solve the issue yourself but the Mac battery connector issues can not be resolved it might be time to book an assessment.

          If you need to book your Mac in for an Apple diagnostic click here.

           

          If you have your serial number it increases our response time. There's a link at the bottom of this form to help you find your serial number if you are unsure where to locate it.