Select Page

Mac just beeps

 

Why is my Apple Mac just beeping?

An Apple Mac that just beeps could be a result of several different factors. It is often difficult to identify the exact root cause, in which case you’ll need to speak to an Apple specialist. 

 

Why does your Mac beep at startup?

If your Mac beeps when it is starting up it is telling you there is something wrong.

–   RAM

This is the most common cause of a Mac beeping at a startup and it means your Mac can’t detect RAM by either coming loose, or that the RAM did not pass a system integrity check.

Firmware

The other possibility is a problem with your Mac’s firmware and the beep indicates that there has been a problem detected.

– Hard Drive

Some Apple users have reported that their Mac makes a peeping noise prior to the hard drive dying and it could be because it is old or did not function properly in the first place.

– Fan

MacBook Air users have reported a beeping noise due to a loud or non-functioning fan and this could be because of a build-up of hair or dust.

– Logic Board

A  motherboard or logic board may cause a beeping noise if it is failing.

 

What should you try to do to stop your Mac from beeping?

 

–  Reset NVRAM

The NVRAM store important settings and information that your Mac needs to boot and resetting it can fix startup problems.

–  Reset the SMC

SMC stands for system management controller and resetting it can solve problems with a startup.

–   how to reset the PRAM and SMC on your Mac.

 Finally:

If this still does not work you will have to book your Mac in for an assessment and let the professionals assist you. For an Apple, diagnostic click here.

 

If you have your serial number it increases our response time. There's a link at the bottom of this form to help you find your serial number if you are unsure where to locate it.